Campbell Hausfeld CL1565 Mode D'emploi page 7

General Troubleshooting Guide (Continued)
Symptom Possible Cause(s)
Excessive 1. Incorrect, damaged
vibration or or worn sanding
grinding noise pad
2. Worn or damaged
internal parts and/
or bearings
Tool will not shut Worn or dirty air valve
off or seat
Corrective Action
1. Replace with correct pad (size, weight and
style)
2. Inspect and replace if necessary
Clean and replace if necessary
www.campbellhausfeld.com
CL1565, CL1567
7