Tools Required; Mounting Options; Installing Your Fan - AirPro Progress Lighting P2590 Manuel D'installation

Tools Required

Phillips screw driver, straight slot screw driver,
adjustable wrench, step ladder, and wire cutters.

Mounting Options

If there isn't an existing cUL listed mounting
box, then read the following instructions.
Disconnect the power by removing fuses or
turning off circuit breakers.
Secure the outlet box directly to the building
structure. Use appropriate fasteners and building
materials. The outlet box and its support must be
able to fully support the moving weight of the
fan (at least 35 lbs). Do not use plastic outlet
boxes.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR OTHER PERSONAL INJURY,
MOUNT FAN ONLY TO AN OUTLET BOX
MARKED ACCEPTABLE FOR FAN SUPPORT
AND USE THE MOUNTING SCREWS
PROVIDED WITH THE OUTLET BOX. OUTLET
BOXES COMMONLY USED FOR THE
SUPPORT OF LIGHTING FIXTURES MAY NOT
BE ACCEPTABLE FOR FAN SUPPORT AND
MAY NEED TO BE REPLACED. CONSULT A
QUALIFIED ELECTRICIAN IF IN DOUBT.

3. Installing Your Fan

Outlet box
Figure 1
Outlet box
Figure 2
Angled ceiling
maximum
Provide strong support
18.5 angle
Recessed
outlet box
Figure 3
Note: You may need a longer downrod to
maintain proper blade clearance when installing
on a steep, sloped ceiling.
Outlet box
Figure 4
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4
(available at your Progress Lighting Retailer).
Ceiling
hanger
bracket