Part Identification - Orbegozo LI 3500 Mode D'emploi

LI 3500
• Do not use the liquidizer if the filter is damaged. Do not
use the appliance if you observe any cracks or damage
to any part of it.
• Do not use your fingers to press the food, always use the
plunger.

PART IDENTIFICATION

A. Pusher
B. Lid funnel
C. Filter basket and Grater
D. Residue/Pulp Cup
E. Motor Casing
F. Juice Cup
G. On/Off Switch
H. Securing Switch
BEFORE USING FOR THE FIRST TIME
• The following is recommended when initially using the juice extractor: Practice assembling and
dismantling the unit several times before adding fruits or vegetables.
• Always ensure the appliance is unplugged
• Wash all parts of the juicer: the pusher (A), the protective cover (B), basket (C), and the ice and pulp cups
(F.D)in warm soapy water. Do not wash the parts in a dishwasher. Never immerse the motor casing (E)in
water. Wipe it with a damp cloth.
DISMANTLE AND ASSEMBLY
Dismantling:
Always remove the plug form electrical outlet
before dismantling.
Fig. 2: Push the Securing clamps (H) left and
remove the protective cover (B)
Fig. 3: Remove the filter basket/grater (C), then
pulling the Residue/Pulp Cup (D)
Assembling:
Fig. 4: Place the Residue/Pulp Cup (D) on the
motor casing (E),
Fig. 5: Insert the Grater until the filter
basket/grater is secure.
Fig. 6: Mount the protective cover (B) and
fasten the Securing clamps(H)
Fig. 7: Place the cups underneath the spouts.
10