Télécharger Imprimer la page

Publicité

Liens rapides

ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE
INSTRUCCIONES DE ENSAMBLAJE
Model/
Modèle
/ Modelo
-4268-4269-
Article/
Item
/ Articulo
Wall or Center Unit
-629-
Unité murale ou de coin
Biblioteca de pared o de esquina
ADULT ASSEMBLY REQUIRED
DOIT ÊTRE ASSEMBLÉ PAR UN ADULTE
DEBE SER ENSAMBLADO POR UN ADULTO
N.B.: It is important to carefully read the instructions
before beginning the assembly.
Identify all the parts and hardware.
We recommend that you assemble the unit on a carpeted floor
to avoid scratches. To facilitate assembly
Keep the assembly instructions
for warranty purposes. It contains all pertinent
information regarding replacement parts and maintenance.
N.B. Il est important de bien lire les instructions
avant de commencer l'assemblage.
Bien identifier les pièces et la quincaillerie.
Il est recommand d'assembl
é
éviter les égratignures. Pour un assemblage facile et agréable
;
2 personnes sont requises
Gardez les instructions d'assemblage pour
la garantie. Elles contiennent toutes les informations pour un
remplacement de pièce ou pour l'entretien périodique.
N.B. Lea con detenimiento las instrucciones
antes de comenzar a ensamblar su mueble.
Identifique las piezas y los articulos de ferretería.
Se recomienda ensamblar la unidad sobre una alfombra
para evitar los rasguños. Para un ensamblaje mas facil
se necesitan dos personas.
para
un futuro
Este instructivo contiene todas las informaciones necesarias
para un sustitución de pieza o un mantenimiento periodico.
1-800-290-0465
10012028
Rev.:Bi1
2 people are required
for future use
and
er
l'unité sur un tapis pour
.
utilisation future
et pour
Guarde
el instructivo de ensamble
uso
de garantía.
y para usos
26/01/2012
.

Publicité

loading

Sommaire des Matières pour South Shore 4268-629

  • Page 1 N.B.: It is important to carefully read the instructions before beginning the assembly. Identify all the parts and hardware. We recommend that you assemble the unit on a carpeted floor ASSEMBLY INSTRUCTIONS to avoid scratches. To facilitate assembly 2 people are required Keep the assembly instructions for future use INSTRUCTIONS D’ASSEMBLAGE...
  • Page 2 AVERTISSEMENT ADVERTENCIA WARNING Serious or fatal crushing injuries Des blessures graves ou fatales El vuelco del mueble puede ser can occur from furniture tip-over. peuvent résulter de basculement causa de lesiones graves o de un To help prevent tip-over : du meuble.
  • Page 3 •TO PREVENT THE UNIT FALLING ON CHILDREN Locate a stud in the wall behind the unit. Screw -116- through -703- and the safety strap in the stud of the wall -Safety strap installation -Installation de la sangle de sécurité •If the safety strap is not in the box, please contact the -Instalacion del correa de seguridad consumers service in order to obtain another one before using the furniture.
  • Page 4 MAINTENANCE TIPS/ CONSEILS D'ENTRETIEN /CONSEJOS DE MANUTENIMIENTO CUSTOMERS SERVICE/ SERVICE À LA CLIENTÈLE / SERVICIO A LA CLIENTELA If you have any difficulty assembling this unit, or to order replacement parts, do not hesitate to contact us. - Never let liquids or damp cloths sit on this furniture. Do not return any parts to the store, find the number(s) Ne jamais laisser de liquide ou linge humide of the part(s) in the “Exploded view”...
  • Page 5 HOW TO USE THE DOWEL(-144-) AND THE ECCENTRIC NUT(-158-) EXEMPLE D'UTILISATION (GOUJON(-144-) ET ECROU(-158-)) EJEMPLO DE UTILIZACIÓN (CLAVIJA(-144-) Y TUERCA EXCÉNTRICA(-158-) -144- -158- FRANÇAIS ENGLISH ESPAÑOL Fully insert the “quick fit dowel -144-” nsérer jusqu’au fond le «goujon à Introduzca el “clavija -144-” hasta el fondo into the specified holes.
  • Page 6 -EXPLODED VIEW (Piece numbers for reference)FACING THE UNIT VUE EXPLOSÉE (Numéros des pièces pour références)FACE AU MEUBLE VISIÓN DE CONJUNTO (Número de las piezas para referencia)FRENTE AL MUEBLE RIGHT SIDE CÔTÉ DROIT LADO DERECHO LEFT SIDE CÔTÉ GAUCHE LADO IZQUIERDO - All parts are marked out or labelled on one side.
  • Page 7 2 1/2" ROUND HEAD SCREW CODE HARDWARE DESCRIPTION -116- VIS 2 1/2" TÊTE RONDE CODE DESCRIPTION DE LA QUINCAILLERIE TORNILLO 2 1/2" CABEZA REDONDA CODIGO CANTIDAD DESCRIPCION DE LA FERRETERIA FELT -357- PATTE FEUTRE PATA FIELTRO 3/4" COMMON NAIL BUMPER -90- -374- CLOU À...
  • Page 8 Required/Requis/Requerido * TOOLS REQUIRED/ OUTILS REQUIS/ HERRAMIENTAS REQUERIDOS: -231- - 2 PEOPLES/ 2 PERSONNES /2 PERSONAS - HAMMER /MARTEAU /MARTILLO - STANDARD /PLAT /PLANO - PHILLIPS /ÉTOILE/ ESTRELLA /OU/ - ROBERTSON/ CARRÉ /CUADRADO - Insert -231-(14) into G, C1, C2, H and H1. - Insérer -231-(14) dans G, C1, C2, H et H1.
  • Page 9 Required/Requis/Requerido Required/Requis/Requerido - Raw face - Face brute -701- - Lado bruto -144- -703- -704- C(2) -POSITION #2 -POSITION #1 -POSICIÒN #2 -POSITION #1 OU #3 -POSICIÒN #1 - Screw 704(1) through 703(1) and 701(1) in A (Check position) - Insert -144-(32) into A, A1, G, C(2), G1, H and H1. - Visser 704(1) à...
  • Page 10 Required/Requis/Requerido -158- -816- C(2) F(2) H2(2) -158- - With thumb, insert -158-(32) into C(2), C1, C2, F(2), H, H1 and H2(2). (Make sure the little arrow is towards the insertion hole.) - Avec le pouce, insérer -158-(32) dans C(2), C1, C2, F(2), H, H1 et H2(2). (Assurez-vous que la flèche pointe vers le trou d'insertion.) - Con el pulgar, insertar -158-(32) en C(2), C1, C2, F(2), H, H1 y H2(2).
  • Page 11 Required/Requis/Requerido -121- -158- -251- correct/ incorrect/ correcto incorrecto -404- -121- -251- -251- J / J1 -404- - Insert C(2) into F(2). - Tighten right -158-(2) little more than a half turn on F(2) to lock pieces together. - With the hammer, insert -251-(4) to J and J1. - Screw -121-(2) through J and J1 into -404-(2).
  • Page 12 Required/Requis/Requerido -160- -158- -158- -171- correct/ incorrect/ correct/ incorrect/ correcto incorrecto correcto incorrecto -158- -171- -160- -160- - Insert C and H into G. - Tighten right -158-(2) little more than a half turn on C to lock pieces together. - Screw -160-(2) through G into H.
  • Page 13 Required/Requis/Requerido Required/Requis/Requerido -160- -160- -158- -160- -170- correct/ incorrect/ -171- correcto incorrecto -160- -170- -160- -160- -160- -160- -160- -158- - Insert C and H1 into G. -171- - Tighten right -158-(2) little more than a half turn on C to lock pieces together. - Screw -160-(2) through G into H1.
  • Page 14 Required/Requis/Requerido Required/Requis/Requerido -171- -158- correct/ incorrect/ -90- correcto incorrecto -357- -90- -90- -90- -90- -90- -90- -90- -90- -90- -90- -357- -158- -171- - Insert A into C(2), H and H1. - Make sure the unit is level (squared). - Tighten right -158-(8) little more than a half turn In beginning by the corners, nail F1 and F2 to A, G, H and H1 with -90-(20).
  • Page 15 Required/Requis/Requerido Required/Requis/Requerido -171- -171- -158- -158- correct/ incorrect/ correct/ incorrect/ correcto incorrecto correcto incorrecto -158- -171- -158- - Insert C2 and C1 into A1. - Insert H2(2) into A1. -171- - Tighten right -158-(4) little more than a half turn - Tighten right -158-(4) little more than a half turn on C2 and C1 to lock pieces together.
  • Page 16 Required/Requis/Requerido -160- -170- -158- -158- -171- -170- correct/ incorrect/ -160- correcto incorrecto -171- - Insert G1 into H2(2). -160- - Tighten right -158-(4) little more than a half turn on H2(2) to lock pieces together. - Screw -160-(4) through C2 and C1 into G1. - Cover -158-(4) with -171-(4) on H2(2).
  • Page 17 Required/Requis/Requerido Required/Requis/Requerido -160- -90- -160- -160- - Make sure the unit is level (squared). - Insert C2 and C1 into A. In beginning by the corners, nail F3 to A1 and G1 with -90-(10). - Screw -160-(4) through A into C2 and C1. Assurez vous que l'unité...
  • Page 18 Required/Requis/Requerido * Doors adjustement (Hinges) -374- Ajustement des portes (Charnières) * Ajuste de las puertas (Bisagras) -LEFT/ RIGHT -GAUCHE/ DROITE -IZQUIERDA/ DERECHA -DEPTH -PROFONDEUR -PROFUNDIDAD -251- -251- -374- -374- -251- -HEIGHT -251- -HAUTEUR -ALTURA - To install J and J1, screw -251-(2) into C(2). * Make sure the unit is level.
  • Page 19 Required/Requis/Requerido -180- -816- -816- - Insert -816- into F3. - Insert -180-(16) on C(2), H and H1. - Slide G2(2) and G3(2) on -180-(16). Insérer -816- dans F3. - Insérer -180-(16) sur C(2), H et H1. - Glisser G2(2) and G3(2) sur -180-(16). - Insertar -816- en F3.
  • Page 20 42”TV le non-respect de cette recommandation. -185 lbs- - Este producto las Indutrias “South Shore” ha sido -20 lbs- -20 lbs- concebido para resistir el peso que se menciona aquí. No somos responsables del daño de piezas -20 lbs- o cualquier otra lesión ocasionada por el no...
  • Page 21 5 YEAR LIMITED WARRANTY GARANTIE LIMITÉE DE 5 ANS GARANTIA LIMITADA DE 5 AÑOS 1. South ShoreTM Furniture provides the original buyer with a 1.Meubles South ShoreMC garantit à l'acheteur original, pour 1.South ShoreMR garantizan al comprador original, por un warranty covering “defects”...

Ce manuel est également adapté pour:

4269-629