Device Installation - ealloora WATCH Guide Rapide

7. Device Installation

Choose the environment you want to monitor
and install your WATCH near a window using
double-sided tape or two screws using the
appropriate slots on the back.
Turn on your WATCH. After a flash of 30 seconds,
the WATCH is active; check your WATCH passing
your hand in front of it and an alert will arrive on
your smartphone. Alternately place WATCH near
another window and check it again.
You will receive an alert on your smartphone every
time WATCH detects an unauthorized movement.
In case of problems contact the customer care on
www.ealloora.com
9