Mounting On A Table - LG AN-GXDV55 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mounting on a Table

1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (4 inches) (minimum) space from the wall for
proper ventilation.
2 Connect the power cord to a wall outlet.
• Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may
damage the product.)
• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer's warranty.
• Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV
may tilt forward after being installed.) Do not use too much
force and over tighten the screws; otherwise screw may be
damaged and not tighten correctly.
• Only use the authorized stand and wall mounting bracket
made specifically for LG products.
- Pursuant to Consumer Protection Law, LG Electronics will
not be held responsible for any product malfunction,
material damage or injury caused by using products not
authorized by LG Electronics.
10 cm
(4 inches)
Securing the TV to a Wall
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
• Use a platform or cabinet that is strong and large enough to support
the TV securely.
• Brackets, bolts and ropes are not provided. You can obtain additional
accessories from your local dealer.
Specifications
Width x Height x Depth
Model Name
(mm) (inches)
21 x 177 x 271
AN-GXDV55
(0.8 x 6.9 x 10.6)
21 x 177 x 284
AN-GXDV65
(0.8 x 6.9 x 11.1)
20 x 179 x 323
AN-GXDV77
(0.7 x 7.0 x 12.7)
Weight
(kg) (lbs)
0.7
(1.5)
0.8
(1.7)
0.8
(1.7)
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

An-gxdv65An-gxdv77

Table des Matières