Dacor DRZ18980 Serie Mode D'emploi page 20

Operations
NOTE
• When you change the temperature on the panel, the panel displays the actual
temperature inside the refrigerator until the temperature matches the temperature you
set. Then, the panel displays the new set temperature. Note that it will take time for the
refrigerator to reach the new temperature. This is normal. During this time, you need
not set the temperature again.
• If no button is input for 10 seconds after Control Lock is deactivated, the display will
turn off except for the Control Lock button. To turn the display on, press Control Lock
again.
• If the control panel moisture or liquid on its surface, it may fail. Wipe the moisture or
liquid using a dry cloth, and then try again.
01 Freezer / Power Freeze (3 sec)
Freezer
Power Freeze
20 English
Dacor_BRR9000M_FRE_DA68-03607A-08_EN.indd 20
You can use the Freezer button to set the freezer temperature or to
activate/deactivate Power Freeze. To set the freezer temperature,
press Freezer repeatedly. Available temperatures are between 5 °F
(-15 °C) and -8 °F (-23 °C).
Power Freeze lowers the freezer temperature and speeds up the
freezing process. In Power Freeze mode, the freezer runs at full
power for several hours and then returns to normal operation and the
previous temperature setting.
• To activate Power Freeze, press and hold Freezer for 3 seconds.
The corresponding indicator (
speeds up the freezing process for you.
• To deactivate, press and hold Freezer for 3 seconds again.
NOTE
Using Power Freeze increases power consumption. If you do not
need the Power Freeze function on, make sure you turn it off so that
the refrigerator can return to normal operation and the previous
temperature setting.
) lights up, and the refrigerator
2020-12-11 4:46:38