Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation instructions
IFEEL mode
The temperature sensor built in remote controller is activated.It can sense its surrounding temperature,and
transmit the signal back the unit,the unit can adjust the temperature so as to provide maximum comfort.
How to set IFEEL mode ?
Press the
button for about 5 seconds once.
Result :
The transmit signal in the display will appear,
the IFEEL function will be started.
Note:
The default setting is IFEEL inactiving.
How to cancel IFEEL mode?
Press the
button for about 5 seconds once again.
Result :
IFEEL function will be shunted off.
DIMMER button
How to set the DIMMER ?
Press the DIMMER button to turn off the light and the display in the unit.
Note:
When the light is off,receive signal will turn on the light again.
CLOCK button
How to adjust the real time?
1.
Press
button for about 5 seconds once.
Result :
The time flashes on the LCD.
2.
Press
and
Result :
Once to increase or decrease the time setting by 1 minute.
One and a half seconds to increase or decrease the time setting
by 10 minute.
For a longer time to increase or decrease the time by 1 hour.
3.
Press
button once again.
Result :
The real time is set.
buttons.
PRESS
PRESS
9
1st
2nd
PRESS
PRESS
Publicité
Chapitres
Table des Matières
