Installation - Chamberlain 940EV Mode D'emploi

Entrada inalambrica sin llave
Masquer les pouces Voir aussi pour 940EV:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Select a location to mount the Keyless Entry at a minimum height
1
of 5 feet (1.5 m) out of reach of children.
2
Remove battery cover and battery.
3
Mark the top mounting hole and drill 1/8 inch (3.2 mm) pilot hole.
4
Install the top screw, allowing 1/8 inch (3.2 mm) to protrude above
the surface. Position the Keyless Entry over the top screw.
5
Mark the bottom hole and drill 1/8 inch (3.2 mm) pilot hole. Install
the bottom screw. Do not overtighten to avoid cracking the plastic
housing.
6
Reinstall battery and replace cover.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

940ev-p2940evc940evc-p2

Table des Matières