PY X-S-05 – Beacon Operating and installation instruction
Dimensions
Content of package:
1x Alarm device
1x Diaphragm nipple M20
1x Operating instruction
1x Resistor (only –SSM)
37 [1.46"]
Technical Data
Flash energy
Rated effective luminous
intensity
Flash frequency
Rated voltage
Operating voltage range
Current consumption (max)
Power consumption
Duty cycle
Connection terminal
Protection system
Resistance against impact
Protection class
Operating temperature
Storage temperature
Max. rel. Humidity
Cable entry
Sealing range of
diaphragm nipple
Material of housing
Material of lens
Installation position
Options
Accessory
Lens colours
Approvals
Approvals
(valid for marked equipment)
Construction
VdS 0786-CPD-21219
Product
Options
Regulation
Rated voltage
(305/2011/EC)
Operating voltage range
acc. to EN54-23
Lens colours
Signalling area
12
Environmental
protection class
Installation position
Testing takes place using the supplied diaphragm nipple and the outer fastening bores.
G212186 Lens color: red and clear, data see Construction Product Regulation (305/2011/EC)
VdS
G217016 Lens color: white, yellow, amber, green, blue. These lens colors are not certified according to EN54-23 and
are not be used for alerting in case of fire.
61062-13 HH
GL
CNBOP
2016/2014
Rated Voltage
115V AC
230V AC
UL, cUL
24V AC
12V DC
24V DC
48V DC
PYRA Xenon beacons PY X-S-05 comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules
085 501 949p
109.6 [4.31]
98 [3.86]
prepared
M20 piercing
12 V DC
24 V DC
10 –15 V DC
18 – 30 V DC
700 mA
360 mA
7,5 W
9,5 W
With the use of cable diameters <7 mm, a cable screw joint
with sufficient ingress protection must be provided
Environmental Category C, H, EMC1
Visual Signal Appliance - General Signaling Equipment - UEES, UEES7
Suitable for indoor and outdoor use.
Warning: Not to be used as a Visual Public Mode Alarm Notification Appliance.
According to CSA-C22.2 No. 205-M1983 clause 4.3.4 the connection is limited to max. three leads.
80.6 [3.17]
22 [0.87"]
5J
44 cd (clear)
1Hz
24 V AC
48 V DC
50/60 Hz
40 – 60 V DC
18 – 30 V AC
170 mA
800 mA
7,5 W
30 VA
100%
0,14 - 2,5mm² / AWG24 - AWG 14 (stranded)
IP66 (EN60529), Type 4 & 4x
IK08 (EN50102)
II
Double insulated equipment
-40°C...+55°C
-40°C...+70°C
90%
4x M20 (prepared)
7 – 13 mm
PC/ABS Blend
PC
arbitrary
-SSM (see page 4)
Sealing plug (Art-no. 28300000002)
clear, white, yellow, amber, red, green, blue
–SSM (24 V DC only)
24 V DC
18 V – 30 V
red, clear
EN 54-23 Category O: see document 30320-005-1
Type B
see document 30303-005-1
30320-004p
50 [1.97"]
26.8 [1.06"]
35.4
[1.39"]
44.1 [1.74"]
Hole pattern in the
inside of housing
115 V AC
230 V AC
50/60 Hz
50/60 Hz
92 - 127
184 – 253 V AC
V AC
120 mA
90 mA
14,5 VA
21,5 VA
48 V DC
40 – 60 V DC
3