Eu Declaration Of Conformity - Resol Grundfos Direct Sensors VFS Manuel Pour Le Technicien Habilité

Safety advice
Please pay attention to the following safety advice in order to avoid danger and
damage to people and property.
Instructions
Attention must be paid to the valid local standards, regulations and directives!
Information about the products
Proper usage
The sensor is designed for measuring the temperature and the flow rate in
compliance with the technical data specified in this manual.
Improper use excludes all liability claims.

EU Declaration of conformity

The product complies with the relevant directives and is therefore
labelled with the CE mark. The Declaration of Conformity is available
upon request, please contact the manufacturer.
Note
Strong electromagnetic fields can impair the function of the device.
Î Make sure the device as well as the system are not exposed to
strong electromagnetic fields.
Target group
These instructions are exclusively addressed to authorised skilled personnel.
Only qualified electricians should carry out electrical works.
Initial installation must be effected by the system owner or qualified personnel
named by the system owner.
Subject to technical change. Errors excepted.
9
Description of symbols
ATTENTION Warnings are indicated with a warning triangle!
Î They contain information on how to avoid the
danger described.
Signal words describe the danger that may occur, when it is not avoided.
• ATTENTION means that damage to the appliance can occur.
Note
Notes are indicated with an information symbol.
Î Arrows indicate instruction steps that should be carried out.
Disposal
• Dispose of the packaging in an environmentally sound manner.
• At the end of its working life, the product must not be disposed of as urban
waste. Old appliances must be disposed of by an authorised body in an
environmentally sound manner. Upon request we will take back your old
appliances bought from us and guarantee an environmentally sound disposal
of the devices.
1 Contents
1 Technical data .............................................................................11
2 Mounting .....................................................................................14
3 Important note ...........................................................................14