Insert Battery; Installing Lp Gas Tank; Insert Lp Gas Tank; Secure Lp Gas Tank - Uniflame GAD1001 Serie Manuel D'utilisation

Assembly Instructions (continued)
5
Place Lava Rocks
Do NOT dump lava rocks out of package. Carefully place lava rocks by hand so dust
does not clog burner.
6

Insert Battery

Note: Remove plastic wrapper before installing battery.
C
x 1
LP Gas Outdoor Fireplace Model No. GAD1001 Series

Installing LP Gas Tank

To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Need a tank of gas? Try tank exchange service. It's easy, fast, safe,
and available at tens of thousands of conveniently located retail outlets
nationwide. You can purchase a new full tank or exchange your empty for a
precision filled one.

Insert LP Gas Tank

WARNING: Make sure LP gas tank valve is closed. Close by turning valve clockwise.
Place precision filled LP gas tank upright into hole in the base of the outdoor fireplace so it is
arranged for vapor withdrawal.

Secure LP Gas Tank

Turn wing nut clockwise until tight.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in
the head of the LP gas tank, head of the regulator valve or in
the head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it
stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve is OFF.
Disconnect gas line to tank by turning knob counterclockwise
until it is loose.
Caution: LP gas tank must be properly
disconnected and removed prior to moving
this outdoor fireplace.