Sony NXL-IP4F Mode D'emploi page 25

Rear
a
Equipotential grounding terminal
b SDI video (output) connectors 1 to 4
c NMI LAN connectors 1 and 2*
* The connector on the right (when facing the
rear of the unit) is NMI LAN connector 1.
d RS-232C connector (cannot be used)
e DC plug clamp attachment point
f DC IN connector
g LINK indicators 1 and 2
For details, see "LINK Indicator"
(page 11).
h DIP switches 1 to 3 (cannot be used)
Indicators
SYSTEM Indicator
Indicates the status of the unit.
System status
No DC power supply Off
Startup in progress
(including during
video and network
synchronization)
Startup complete (no
video transmission)
Video transfer in
progress
Fan error
Internal temperature
error
Low optical module
power supply
Network error
Other error
If the indicator does not light (green) after
turning the power on, contact a technician
or your local Sony representative.
LINK Indicator
Indicates the network connection status.
Network status
Normal status
Awaiting connection Blinking (green)
Indicator
Blinking (green)
Slow blinking
(green, 2-sec.
interval)
Lit (green)
Rapid blinking
(orange, 0.5-sec.
interval)
Blinking (orange, 1-
sec. interval)
Blinks 2 times
(orange)
Blinks 3 times
(orange)
Blinks 4 times
(orange)
Indicator
Lit (green)
Indicators
11
GB