Troubleshooting; Specifications - Royal Sovereign Fast Sort FS2D-CA-N Guide D'utilisation

Trieuse de monnaie numérique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLEShOOTING

Symptom
1. Motor does not run
2. Coins are not sorting
into tubes.
3. The coin is jammed in
the hopper

SPECIFICATIONS

MODEL
DIMENSION (L) x (D) x (H)
SORTING SPEED
MOTOR TYPE
POWER CONSUMPTION
POWER SUPPLY
Sorting speed varies depending on mix of coin denominations.
*
FS2D-CA-N manual.indd 9
1. Check that the power cord is plugged in.
2. Check that the power switch is turned on.
3. Press the RUN/STOP button again.
4. Check that the tube trays are in the correct position: pushed all the way in or pulled all
the way out.
Foreign objects and bent, damaged, or sticky coins may cause the machine to jam:
1. This machine is designed to resolve jams automatically. Wait about 15 seconds as the
agitation screw and the running vessel rotate back and forth to release the jam.
2. Tap machine gently on the side to loosen jam.
3. If the machine is still not sorting, push the RUN/STOP button.
4. Loosen the Hopper Lid Screw with a coin.
5. Lift the Hopper Lid exposing the Running Vessel.
6. Retrieve jammed item and replace Hopper Lid.
7. Screw Hopper Lid and push RUN/STOP to start sorting again.
1. Turn the machine power switch to off and back to on.
2. If the coin is still jammed, turn the power switch to off and gently remove the jammed
coin.
FS 2 D-CA-N
245 mm x 265 mm x 296 mm
9.7" x 10.5" x 11.7"
Up to 180 coins / min *
AC synchronous motor
9.6 W
120Vac / 60Hz
9
FS2D-CA-N
Solutions
2011-8-22 8:25:36

Publicité

Chapitres

Table des Matières
loading

Table des Matières