MATHIS MONTABON Chronos Manufactures MM-01 Mode D'emploi page 10

EN
to ensure its longevity. A revision should optimally be conducted once a year to counteract general
wearout and to maintain the water-resistance of your watch.
SETTING THE DATE, MONTH AND DAY OF THE WEEK
Pull the crown carefully out to position 1 and set the hands outside the zone mentioned before, e.g. at
6:00. Press the adjustment pusher A until the right date is displayed (1 - 31). Press the adjustment pusher B
until the right month is displayed. Press the adjustment pusher C with a pointed tool until the right day is
displayed. The date/month must be set manually at the end of the month.
SETTING THE TIME
Turn the crown in either direction to set the current time. The indicator in the middle (1 – 24) is the 24 hour
display. Then press the crown back in and bolt it by turning it clockwise.
Instruction Manual
MM-01: Grande Date
Model number: MM-01
Mouvement: Automatic
Calibre: M-1
20 jewels
USE
Winding: When setting the watch for the first time, unscrew the
crown by turning it counter-clockwise. Winding is done by tur-
ning the crown clockwise (40-50 times). The watch will then auto-
matically wind up when you wear it.
Attention: So as not to damage the mouvement of the watch,
do not set the date/month/day while the hands are between
8 am and 4pm (16:00) or between 8pm (20:00) and 4 am. Ple-
ase press the button on your watch slowly and carefully to
avoid damaging the mechanism. When the warranty of your
watch expires, we recommend you to send it in for a revision