Product Setup - D-Link DIR-605L Guide D'installation

PRODUCT
SETUP
iNstAll Your router
Step 1
Position your router close to your modem and the computer that is already online. Place this router
in an open area of your intended work area for better wireless coverage.
Step 2
Unplug the Ethernet cable from your modem that is connected to your computer. Plug it into the LAN
port labelled 1 on the back of your router. The router is now connected to your computer.
Step 3
Find another Ethernet cable and plug the end of this cable into the port labeled INTERNET on the
back of the router. Plug the other end of this cable into the Ethernet port on your modem.
Step 4
Connect the supplied power adapter into the power port on the back of the router and then plug into
a power outlet or surge protector. Verify the power light is lit. The wizard below steps through a basic
autodetect network setup.
5
dir-605l