Chauvet Professional OVATION GR-1 IP Guide De Référence Rapide page 3

Mounting
Before mounting this product, read the
Product Mounting Diagram
4
Gobo Mounting
1.
Ovation GR-1 IP QRG Rev. 2
QUICK REFERENCE GUIDE
Safety Notes.
3
2
1. Remove gobo retaining ring.
2. Insert gobo into gobo holder.
3. Replace gobo retaining ring using thumbs to push
ring into place.
1. Loosen the screws on the accessory
slot and push the cover toward the front
1
of the product.
2. If the lens tube is obstructing the
accessory slot, push it out far enough
to allow the Ovation GR-1 IP to slide
into the Ovation E-260WW IP.
3. Slide the Ovation GR-1 IP into the
accessory slot with the flat side facing
the back of the Ovation E-260WW IP.
4. Plug in the power & data control cable
into both products as indicated.
2.
EN
3.
2