Programming Procedures - Honeywell RCWL300A Mode D'emploi

Programming Procedure
Learn Procedure
To enable your chime to learn the identity
of your bell push:
• Press the l button and keep it
pressed. Each Icon will light in
turn. When the Icon you want is lit,
release the button.
• While the Icon you have selected is
lit, operate your push. The chime will
sound. The Icon will flash.
Unlearn Procedure
If you want to remove a push from the
chime's memory:
• Press the l button and keep it
pressed.
• Each Icon will light in turn. When the
Icon associated with the push to be
unlearned is lit, release the button.
• Press and hold down both l &
buttons, until a 'beep' sound is
heard.

RCWL300A
69-2109EFS—05