Grounding Instructions - Foremost BTS-1005E-W Manuel D'utilisation

OPERATING MANUAL/INSTALLATION STEPS
Important: It is incumbent upon the installer/homeowner to consult local building and electrical codes to insure proper installation
of this toilet seat.
The Massa Intelligent Bidet Seat is manufactured with a Ground Fault Circuit Interrupter (GFCI) plug.
The GFCI provides a safety mechanism and a grounding wire to guard against an electrical shock.
Should this toilet seat come into contact with water or incur any surge in electrical current the GFCI plug would stop the electrical
current from continuing past the GFCI plug. This safety shut off ensures there is no personal or property damage.
Resetting
In the event of an electrical surge the GFCI will engage the shut off switch. To reset the GFCI simply press down the reset button on
the plug . This will return the GFCI plug to its original operating setting.
Warning Note
Should this GFCI become damaged for any reason please consult a Licensed Electrician for
repair or replacement. DO NOT ATTEMPT THIS YOURSELF.
Check with a licensed electrician or serviceman if the grounding instructions are not completely understood. Or if there is any doubt
the product is properly grounded.
This product is for use on a nominal 110V circuit, and has a GFCI that looks like the electrical plug illustrated below.
This product has been certified by
JULY 2020 FOREMOST INTERNATIONAL LTD. (CANADA): 5970 Chedworth Way, Unit B, Mississauga, Ontario, Canada L5R 4G5 - 1-888-256-7551 www.foremostcanada.com
FOREMOST GROUPS INC. (U.S.A.): 6241 Northwind Parkway, Hobart, IN, USA 46342 - 1-888-620-3667 www.foremostbath.com
STEP-BY-STEP ILLUSTRATED
Massa Intelligent Bidet Seat

GROUNDING INSTRUCTIONS

GROUNDING METHODS
GFCI Plug
Grounded
outlet
Grounded pin
Grounded
outlet box
page 4/15