Troubleshooting; Checkpoints - Dacor Modernist DDW24M99 Serie Manuel D'utilisation

Troubleshooting

Checkpoints

If you encounter an issue to check with the dishwasher, first check the table below and try
the suggestions.
Symptom
The dishwasher does
not start.
The dishwasher takes
too long to start
operation.
40 English
DACOR_DW9500MD-00196A-00_EN.indd 40
Possible Cause
The door is not completely
closed.
The START (Reset) Button is not
selected.
No cycle is selected.
The power cord is not
connected.
Water is not being supplied.
The control panel is locked.
The dishwasher is connected to
a cold water supply.
Action
• Make sure the door is
latched and completely
closed.
• Make sure the upper rack
is properly joined with the
duct nozzle.
• Make sure the upper rack is
properly assembled.
• Make sure the door is
latched and completely
closed. Then, press START.
• Select a cycle.
• Connect the power cord.
• Make sure the water supply
valve is open.
• Unlock the Control Lock
function.
• To work properly, the
dishwasher must be
connected to a hot water
supply. If connected to
a cold water supply,
additional time is required
to heat the cold water.
4/25/2017 7:53:03 PM