SCS Sentinel OutCam SVI0061 Notice D'utilisation Et D'installation page 19

Adding the camera
1.
Click on "NEW DEVICE" to
add your camera.
4.
QR CODE to
WIFI
be scanned
2.
Enter your wi-fi key and scan
the QR code on your camera
or enter the code manually.
5.
Enter a name for the camera
and the room in which it is
located.
Plug in the camera's power cable and
place it close to your wi-fi router.
Your phone must be connected to the
same wi-fi network as your camera.
Wait for the voice command.
Some materials may reduce the Wi-Fi range.
200 m
Free field
100%
Wood, glass
80%
Bois, verre / wood, glass
Plasterboard
60-70% Cloison placoplatre / plasterboard
Stone
Pierre / stone
50-70%
Béton / concrete
Concrete
20-50%
Métal / metal
<10% Metal
3.
The network
needs to be
2.4 GHz to
work.
2.4 GHz
When the camera announces
"awaiting setup'', press
next. If the camera makes no
announcement, hold the Reset
button down for 5 secs.
Add a profil picture
from your camera,
the gallery or select
a picture by default
(product visual or last
motion capture).
6.
EN
19