English; Product Brief Introduction; Technical Parameters; Accessories List - Reboot RBM2100 MIG Manuel D'utilisation

English

1 Product brief introduction

1.1 Technical parameters

Machine type
Supply voltage (V)
Frequency (Hz)
Rated Max.Input current (A)
Output current adjustment (A)
Output voltage (V)
Wire feed speed (m / min)
Enclosure protection class
Suitable plate thickness (mm)

1.2 Accessories list

MIG Welding Gun
RBM2100*1
Torch*1

2 Installation instruction

2.1 Welding wire Installation steps:

The wire holder filled with wire installed on the wire feeder. The hole position of the wire plate should be aligned with the fixed plug on the shaft.
The wire coil should be rotated and loosen the wire, to prevent the wire from loosening, the new wire disk head is usually inserted into the fixed hole at the
edge of the wire. In normal use, to prevent the bending of the wire to be stuck, please cut this part of wire.
0.030 " (0.8mm)/0.040 " (1.0mm)diameter
4 " （ 100mm 1kg ） wire spool
According to the diameter of the wire, choose different wire feed roller.V roller for stainless steel and carbon steel. Knurled roller for flux cored wire. Please
match diameter notes on the roller with the welding wire diameter. Loosen the pressure wheel nut, to pass through the guide wire tube into the wire feed
wheel groove, adjust the pressure wheel pressure welding wire, guarantee the welding wire is not sliding, and not blocking while feeding the wire.
Roller size: external diameter ∮ 30mm/ internal diameter ∮ 10mm/ height 10mm
RBM 2100
1 phase AC 230V±15%
50/60
30(MIG)/27.4(MMA)/16.7(TIG)
40-200(MIG)/30-150 (MMA)/30-150 (TIG)
16.0-24.0(MIG)/21.2-26(MMA)/11.2-16 (TIG)
2-15
IP21
0.5-5
Welding Electrode
Holder Set*1
No load voltage (V)
Duty cycle (%)
Power factor
Efficiency (%)
Wire feeder type
Wire diameter (mm)
Insulation grade
Net Weight (kg)
Overall dimension(mm)
Gas hose*1 Flux Cored
Welding Wire*1
0.030 " (0.8mm)/0.040 " (1.0mm)diameter
8 " (200mm 5kg)wire spool
32
50±5
60
0.7
85
All-in-one
0.8/1.0
F
14
470 × 320 × 376
Earth Electrode Holder
Set*1