General Directions - A.E.B. PLATINOS 531 Mode D'emploi Et Garantie

We advise you to fix the Timing Advance Processor in a vertical position,
away from possible water infiltrations and excessive heat sources ( for
example: exhaust manifolds), so as to avoid to irreparably damage the
Timing Advance Processor.To avoid bad workings of the Timing
Advance Processor we advise you to:
- pass the Timing Advance Processor wires away from the high tension
wire;
- make good connections and do not use "steal current" .
Please, pay attention that the best connection you can do is a
duly insulated welding.
Please advise the client that in case of damage, the Timing Advance
Processor is provided with an emergency connector which switches
off the same variator and resets the original connection operating as
follows:
disconnect the Timing Advance Processor wire and insert the
emergency connector.
Do not absolutely open the Timing Advance Processor box, especially
when the engine is running or the board panel is inserted. A.E.B. srl
declines every responsabilities for damages caused to things or
person which derives from the tampering of its own device
provoked by unauthorized persons.
Stick the adhesive label supplied in the wrapping, into the engine
compartment in a good position, to advise of the presence of the Timing
Advance Processor.
Technical Specifications
Feeding Tension
Overal dimensions of the
Electronic Advance Variator
Box

General directions

10 ÷ 14 Vdc
height
depth
width
Ø fixing hole
English
120 mm
27 mm
75 mm
6 mm
IS 531 REV. 090697-0