Publicité
Les langues disponibles
Les langues disponibles
COMPONENT LIST
1.
VARIABLE AIR CONTROL NOZZLE
2.
BLOWER TUBE
3.
TURBO BUTTON FOR POWER BOOSTING
4.
ON/OFF SWITCH
5.
HANDLE
6.
BATTERY PACK RELEASE BUTTON *
7.
BATTERY PACK *
8.
MOTOR HOUSING
9.
NOZZLE RELEASE BUTTON
10. BATTERY INDICATOR LIGHT (SEE FIG. D)
* Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Voltage
40 V
Maximum air volume
Maximum air velocity
Battery type
Battery capacity
Charger model
Input: 120 V~60 Hz
Output 1: 20 V
Charger rating
Output 2: 20 V
Charging time
(approx.)
Battery pack:
4.0 Ah (1 pc)
4.0 Ah (2 pcs)
Machine weight
6.6 lbs (3.0 kg)
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
*** Charger output 1 and output 2 mean two ports with
the same output voltage and current.
40V Cordless Blower
WG585
WG585.9
Max. (2x20 V Max.)**
620 cfm (volume mode)
165 mph (speed mode)
Lithium-ion
4.0 Ah
/
WA3884
/
,
2.0 A ***
/
,
2.0 A ***
/
1 hr
2 hrs
3.8 lbs (1.7 kg)
ACCESSORIES
WG585
Battery pack
2 (WA3012)
Charger
1 (WA3884)
Only use the appropriate accessories intended for this
tool. Accessory information can be found on the product
packaging, at a WorxNITRO dealer or on our website at
www.worx.com.
OPERATION
INTENDED USE
The blower is intended for residential use only. Use the
blower outdoors to move yard debris as needed.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Charging the battery pack
NOTE:
•
The batteries are shipped uncharged.
Each battery must be fully charged
before the first use.
•
Always fully charge the two batteries at
same time. More details can be found in
charger's manual.
WARNING! The charger and battery
pack are specially designed to work
together, so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because of an electrical failure and hazard
will occur.
Checking the battery condition
NOTE: Fig. A2 only applies for the battery
pack with battery indicator light.
Installing & removing the battery pack
NOTE:
•
This machine will only run when
2 batteries are installed. It is
recommended to use the same
two batteries and charge the two
batteries at the same time.
•
When you use two batteries with
different power,the machine will only
run to the level of the lowest charged
battery.
WG585.9
/
/
FIGURE
9
See Fig. A1
See Fig.
A2
See Fig.
B, C
EN
Publicité
