Yamaha WR450F Manuel D'atelier Du Proprietaire page 166

1 Master cylinder
2 Brake hose holder
3 Brake hose
CABLE ROUTING DIAGRAM
È Install the brake hose so that its
pipe portion directs as shown
and lightly touches the projec-
tion on the caliper.
É Pass the brake hose into the
brake hose holders.
Ê If the brake hose contacts the
spring (rear shock absorber),
correct its twist.
Ë Install the brake hose so that its
pipe portion directs as shown
and lightly touches the projec-
tion on the master cylinder.
2 - 26
SPEC