Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 fitting brackets
- 2 steel spacers Ø8 L5mm
- 4 steel washers Ø8 type
- 4 plastic spacers Ø5
- 1 anti-reflective sticker
Fitting instructions
- Place the brackets on the bike as shown on the picture
: Spacers Ø8 L 10mm location
: Spacers Ø8 L10mm +Ø8 L5mm location
- The fitting brackets are screwed with the
screws 8×40 and the steel washers Ø8.
- Place the anti-reflective sticker to avoid reflections in the nose screen.
- Place the rubber inserts on the fitting brackets. Then thanks to the screws 5×20and the plastic washers, fit the
windshield on the brackets.
: Threaded rubber inserts location
-
Control the correct centering of the windshield and tighten the fitting
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
- 4 steel spacers Ø8 L10mm
- 4 screws BHc 8×40
- 4 screws BHc 5×20 (big head)
- 4 rubber inserts M5 wide flange - thickness : 5mm
Sticker location
ERMAX NOSE SCREEN ADAPTABLE ON
(the final tightening will be done in the last
brackets.
« CAUTION »
FITTING INSTRUCTIONS
BMW G 310 R 2017 → ∞
Estimated mounting time: 20mn
step):
EN
Date : 11/10/17
Publicité
