Power Off; Technical Specifications - Genie 3623 EDS Mode D'emploi

USING THE TARE MODE:
1. Turn the scale on.
2. "0g/0.0oz" will be shown on the display.
3. Place an item on the weighing platform and read the value accordingly.
4. Press the "TARE/ ON" again. The weight of this item will be eliminated and the
reading will change to "0g/0.0oz".
5. Place next item on the weighing platform and get the reading.
Note: The scale will display a negative reading when you remove all items. Press the
"TARE/ ON" key once and the negative reading will disappear.
OVERLOAD
When the loading capacity exceeds the maximum capacity (176 oz or 5kgs) of the Digital
Scale, "EEEE" will be displayed on the LCD screen.
Remove the item(s) from the scale platform to avoid damage to the scale.

POWER OFF

1. The scale can be power off manually by pressing the "TARE/ ON" key for 2 seconds
2. The scale turns off automatically after being idle for one minute.
MAINTENANCE
Clean with a soft cloth. Do not immerse directly into water or detergent, scrub with
abrasive material or use corrosive cleanser.

TECHNICAL SPECIFICATIONS

Maximum Capacity
Graduation
Operating Temperature
Power Source
: 5kgs or 176 oz
: 1g or 0.05oz
: 0°C ~ +40°C
: "CR2032" 3V Battery