Secure each set with 1 screw (C) each.
21. Using screws (C), secure panels to pillar supports and pillar sup-
port connectors. For support connectors closest to front opening,
the first screw will only connect support pillar and pillar support
connectors.
22. Locate guard rails and support brackets.
8
23. Slide support brackets over guard rails. Make certain brackets
curve downward.
24. Insert guard rails into holes of support pillars.
Guard rails will go completely through support pillars. Attach nut
(E) to ends of guard rails.
www.desatech.com
122787-01A