Archos Weather Station- Managing Modules - Archos Weather Station Europa Mode D'emploi

To add/remove a ARCHOS Weather Station sensor
1. Launch the ARCHOS Weather app
2. Make sure the sensors are in pairing mode
3. Tap (icon) and select Station Configuration (figure1)
4. Select Add or Remove a peripheral (figure2)
To add a new sensor
1. Select Add a new sensor (figure3)
2. Success, if not, check if the batteries are inserted and try again
To remove a sensor
1. Press the icon of the sensor you want to remove (figure4)
2. Click on OK to remove your sensor (figure5)
QSG_Weather Station_book.indd 15

ARCHOS WEATHER STATION- Managing modules

2
1
3 4
5
EN
15
18/09/2014 13:17:39