Beschreibung - OJ Electronics DRHX-1055-MNN5 Guide Rapide

Tabel 4.1 DK
Nr. Beskrivelse
1 Testknap
2 4-pol DIP switch
3 LED
4 3 x 7-segment display–
afh. af variant
5 RJ12 Modbus-stik (2 x
RJ12)
6 A/D styre- og
signalklemmer – afh. af
variant
7 Forsyningsklemmer (L,
N, PE)
8 Tilslutningsklemmer for
steppermotor (U, V, W,
PE)
Fig. 4 / Fig. 4 / Abb. 4 / Fig. 4
ON
TEST RUN
OFF
1 2 3 4
MODBUS EIA-485
A B
L N PE U V W PE
L
N
PE
Table 5
Steppermotor = 2Nm
Steppermotor = 4Nm
Steppermotor = 8Nm
n/a
Table 5.1
Max RPM = 250 (Modbus*)
Max RPM = 200
Max RPM = 170
Max RPM = 150
10
Table 4.1 GB
No. Description
1 Test button
2 4-pole DIP switch
3 LED
4 3 x 7 segment display -
depending on variation
5 RJ12 Modbus-plug (2 x
RJ12)
6 A/D control and signal
terminals - depending on
variation
7 Supply terminals (L, N,
PE)
8 Connection terminals
for stepper motor (U, V,
W, PE)
DIP1 DIP2
OFF OFF
ON OFF
OFF ON
ON ON
DIP3 DIP4
OFF OFF
ON OFF
OFF ON
ON ON
© 2017 OJ Electronics A/S
Tabelle 4.1 DE
No.

Beschreibung

1 Testtaste
2 4-poliger DIP-Schalter
3 LED
4 3x7-Segmentanzeige –
je nach Variante
5 RJ12-Modbus-Stecker
(2x RJ12)
6 A/D-Steuer- und
Signalklemmen – je
nach Variante
7 Versorgungsklemmen
(L, N, PE)
8 Anschlussklemmen
für Schrittmotor (U, V,
W, PE)
ON
OFF
1 2 3 4
Tableau 4.1 FR
N Description
o
1 Bouton de test
2 Commutateur DIP à 4 pôles
3 LED
4 Écran à 3 x 7 segments :
selon le modèle
5 Plug RJ12 Modbus
(2 x RJ12)
6 Contrôle A/D et bornes de
signal : selon le modèle
7 Bornes d'alimentation (L,
N, PE)
8 Bornes de raccordement
pour le moteur pas-à-pas
(U, V, W, PE)