Resetting The Camera - Lorex LNZ32P12 12X Manuel D'instruction

9

Resetting the Camera

The camera features a hard reset button that is used to reset all camera set-
tings, including the username and password, back to their default values. This
is useful in case you've forgotten your login credentials or to revert camera im-
age settings back to their default values.
To reset the camera:
1. Use the included Allen key too loosen the dome cover screws (x3). Re-
move the dome cover.
2. Use a Phillips screwdriver (not included) to remove the camera module
cover screws (x2). Lift the black camera module cover off of the camera.
3. Press and hold the reset button below the camera module for at least 10
seconds to reset the camera to default settings.
#LX400020; r. 1.0/16372/16530; en-US
28