Introduction; Intended Use; General Description; Delivery Contents - Deltafox DG-PLM 4622 SP Traduction De La Notice D'utilisation Originale

GB

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions con-
stitute part of this product. They
contain important information on
safety, use and disposal.
Before initial use, please read
these operating instructions care-
fully in order to avoid incorrect
handling.
Use the product only as described
and for the applications specified.
Keep this manual safely and in the
event that the product is passed
on, hand over all documents to the
third party.

Intended Use

The equipment is intended only for mow-
ing lawns and grass areas in domestic
use.
This equipment is not suitable for com-
mercial use. Commercial use will invali-
date the guarantee.
Any use other than specifically permitted
in these instructions may result in damage
to the equipment and represent a serious
risk to the user.
The equipment is intended for use by
adults. Children or other people who are
unfamiliar with the operating instructions
must not use the equipment.
The operator or user is responsible for
accidents or damage to other persons or
their property.
80

General Description

The illustration of the principal
functioning parts can be found on
pages 2 - 4.

Delivery Contents

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Petrol lawn mower
Upper handle bar
-
- Bottom handle (2x)
- Spark Plug Wrench
- Grass collection box
- Cable clamp
- Quick guide
- Instruction manual

Summary

1 Upper handle bar
2 Drive catch
3 Safety catch
4 Starter cord guide
5 Bottom handle
6 Bowden cable
7 Cable clamp
8 Starter handle with starter cord
9 Filler cap
10 Air filter box
11 Air filter (no illustration)
12 Engine cover with ventilation
holes (finger protection)
13 Spark plug connector
14 Spark plug (no illustration)
15 Exhaust guard
16 2 front wheels
17 Steel plate housing
18 Lever for cutting height adjust-
ment
19 2 rear wheels
20 Oil filler cap with dipstick