General Description; Extent Of The Delivery; Functional Description; Overview - Deltafox DG - CLB 2013 Traduction De La Notice D'utilisation Originale

GB

General description

The illustration how to handle the appli-
ance can be found on page 3.

Extent of the delivery

Carefully unpack the blower and check
that it is complete. Dispose of the packag-
ing material correctly.
- Cordless leaf blower

Two-part blowpipe

-
- Battery (2.0 Ah)
- Battery charger
- Translation of the original instructions
for use
- Translation of the original instructions
for use Battery/ Battery charger

Functional description

The cordless leaf blower operates via the
use of a fan. Foliage can quickly be gath-
ered or blown out of hard to reach areas.
The following describes the functions of
the operating parts.

Overview

1 Two-part blowpipe
1a Lower blowpipe, curved
1b Upper blowpipe
2 Connector nozzle
3 Locking button
4 Motor housing
5 On/Off switch
6 Handle
7 Battery
8 Battery charger
8a Charging indicator
9 Release buttons
10 Battery Indicator
10a Button for charge status display
18

Technical data

Cordless leaf blower ........DG-CLB 2013
Motor voltage ............................. 20 V
Idling speed ............................................
Level 1 .................................... 7000 rpm
Level 2 .................................. 13000 rpm
Air speed ................................................
Level 1 .......................................80 km/h
Level 2 .....................................190 km/h
Weight (without battery charger) .....1.6 kg
Sound pressure level
(L ) ....................78,8 dB(A); K
pA
Sound power level (L
guaranteed ...............................92 dB(A)
measured ........ 88,2 dB(A); K
Vibration (a ) ........ 3,069 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
= 2,5 dB
pA
)
WA
=1,04 dB
WA
; K=1.5 m/s
2 2