Télécharger Imprimer la page

Lindy 20376 Manuel Utilisateur page 3

Publicité

Les langues disponibles

Les langues disponibles

User Manual
Overview
1. Digital Input Switch
Select one of the three digital inputs, Optical,
Coaxial or USB by setting the slide switch as
follows:
Position
Input Mode
1
Optical
2
Coaxial
3
USB
2. Optical Input
Connect a digital audio source device such as a
Bluray player, DVD player or set top box using a
Toslink cable to receive audio at up to 24bit/192kHz
3. Coaxial Input
Connect a digital audio source device such as a Bluray player, DVD player or set top box using a
Coaxial cable to receive audio at up to 24bit/192kHz
4. USB Port
Connect a desktop or laptop computer and use the DAC as an external sound card, playing high
definition audio directly from your computer via USB. Requires no additional drivers or software.
The USB port can also be used to connect a DC 5V power supply (not included)
5. Line Out
Connect an amplifier or active speakers using
standard stereo phono cables to output sound
6. Headphone Socket
Connect your headphones
7. Volume Control Dial
Adjust the volume output of the DAC
Warning: Always start with the volume dial at the minimal
setting before connecting headphones. This will
help ensure you don't get unexpected high volume
levels that could damage your hearing
Installation
1. Power down the equipment that the DAC will be attached to
2. Connect the relevant input/output cables as described above
3. Set the Input switch to the desired selection
4. If the DAC is not connected to a computer connect it to a USB power supply (not included) that is
capable of providing 5V 500 – 1000mA
5. Power up the source device and begin audio playback
Please Note: The USB DAC is not compatible with Dolby Digital or DTS formats, which are both forms
of compressed audio. If you play back CDs, DVDs or BDs encoded in Dolby Digital or DTS, you will only
hear some unwanted noise that may damage your speakers. To work around this you need to access
the menu setting of the source device and adjust Dolby Digital or DTS to PCM. This USB DAC works
with any PCM stream from CD players, DVD players and set-top boxes.
LED Colour
Red
Orange
Green
2
1
3
4
5
6
English
7

Publicité

loading