Publicité
HOW TO USE
1. Insert one AA/LR6 battery.
2. To activate motion, press the heart
located in the tail section. Turn off
when not in use.
NOTE: If the Spinball's spinning motion slows
down or stops, it's time to replace the battery.
CHANGING THE BATTERY
1. Use a small Phillips-head screwdriver
to remove the outer housing (3 screws).
2. Unscrew the inner battery compartment
(1 screw) and pivot the compartment
door to open.
3. Replace the old battery with a new AA battery,
and then close the battery compartment door.
Tighten the battery compartment screw.
4. Align the outer housing's screw holes. Tighten
the screws securely to ensure that no water
can enter the housing.
1
OUTER
HOUSING
2
CAUTION:
all screws properly can result in water damage
to the circuit and electrical injury.
HOW TO CLEAN
Rinse with warm water and wipe dry
before storing.
CÓMO USAR
1. Inserte una pila AA/LR6.
2. Para activar el movimiento, presione
el corazón
ubicado en la sección
de la cola. Apáguelo cuando no lo use.
NOTA: Si el movimiento giratorio de Spinball
se vuelve más lento o se frena, es tiempo de
cambiar la pila.
PARA CAMBIAR LA PILA
1. Use un destornillador Phillips pequeño
para retirar la cubierta externa (3 tornillos).
2. Desatornille el compartimiento interior
de la pila (1 tornillo) y gire la tapa del compar-
timiento para abrirla.
BATTERY
COMPARTMENT
Failure to tighten
Publicité
