Refreshing Carpets - Hoover FLOORMATE STEAMSCRUB 2-IN-1 WH20440 Serie Mode D'emploi

Refreshing carpets:
WARNING
!
To reduce the risk of personal injury - Unplug the steam
cleaner when assembling the accessories.
1
Place the microfiber pad on
the floor white side facing up.
Place steam mop onto pad
making sure the entire pad
covers the floor head.
13
Do not clean over floor electrical outlets.
! Do not use steam cleaner or press the Steam
Trigger without water in the water tank.
2
With microfiber pad
attached, hook the steam
mop into the front of the
carpet glider and push to
clip into place. Carpet glider
should only be used when

refreshing carpets.

WARNING
! !
3
Turn the solution dial to OFF
when refreshing carpet.
• IMPORTANT •
When using on carpets, always ensure the
multi-surface Microfiber Pad is properly
attached to the Mop Head.
4
Push On/Off button
to power on and off.