Rackmounting; Connection - Tripp-Lite B021-000-19-SH Manuel D'utilisateur

4. Features

Rackmounting

Tripp Lite's 1U Rackmount Console is designed for mounting in a 1U rack
system. The various mounting options are explained in the sections that
follow.
Standard 4-Post Rackmounting
The standard rackmounting brackets that come attached to the unit allow
it to be installed in standard 1U racks by a single individual.
1 Slide out the rear mounting brackets from the console and mount
both brackets (separate from the console) to the inside rear of a
standard 1U rack system using user-supplied screws.
2
Take the console and gently slide it into the two rear-mounted
brackets in the rack and secure the console in place by inserting
user-supplied screws.
2-Post Rackmounting
The console can also be mounted in a 2-post rack using the optional
2-Post Rackmount Kit (Tripp Lite model B019-000). The mounting
hardware allows for the console to be opened with the drawer in any
position. The kit provides added stability and prevents the console frame
from twisting. See the B019-000 Owner's Manual for detailed mounting
instructions.

5. Connection

Note: Diagram shows the B021-000-19-SH connecting to a Tripp Lite B022-016 KVM switch. If you are connecting to a different KVM or server, the console port
connectors may be in a different location.
1
Plug the included cable kit into the port on the B021-000-19-SH.
2
Plug the keyboard, monitor and mouse connectors on the other end of the KVM cable kit into their corresponding ports on the server or
KVM switch. For USB KVM switches or servers, use the included USB to PS/2 adapter to connect the server or KVM.
3 Plug the Power Adapter into the B021-000-19-SH's power socket and into an AC power source.
4 Power up your server or KVM installation.
1
2
2
4 4
3
1