Publicité
Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham
10-JAN-2021
PARTS INCLUDED:
˚
˚
˚
˚
PIÈCES COMPRISES:
˚
˚
˚
˚
PIEZAS INCLUIDAS:
˚
˚
˚
˚
TOOLS REQUIRED: Phillips and slotted screwdriver, Pencil, Tape measure, level.
OUTILS REQUIS:
Tournevis cruciforme et plat, crayon, ruban à mesurer, niveau.
HERRAMIENTAS REQUERIDAS:
INSTALLATION INSTRUCTIONS
Note: Your Tolson Towel Bar is crafted of forged solid brass with solid brass tubing. Forging is a process whereby a tool forms and
actually compresses the metal with a tremendous amount of force. Each piece is then polished by hand. Our fittings and fixtures for
your home are not merely handsome but will endure for years.
1.
Place one of the End Brackets in desired location on wall.
2.
Mark the location for drywall anchors.Remove the Bracket from the wall. Using only a Phillips head screwdriver, pierce the tip of
the anchor into the wall. Do not push or pound the anchors into the wall, they are designed to bore into the wall like a screw.
Turn the anchor clockwise until its rim is flush with the wall.
3.
Once both anchors are secured, place the End Bracket over anchors and insert mounting screws. Use a slotted screwdriver,
turn mounting screws clockwise just until you feel resistance.
4.
Using a tape measure and a level, determine the location for the second End Bracket (center of first Bracket to center of second
Bracket, use the towel bar as a separator-see Fig.1). Repeat step 2 to install the other two anchors for second bracket.
5.
Insert the towel bar into the loose End Bracket and insert this set into previously mounted End Bracket. Install using the
Williams-Sonoma Inc.
1 pc
Towel Bar
2 pcs
End Brackets
4 pcs
Drywall Anchors
4 pcs
Mounting Screws (Brass ø 7.0 x 32.0 mm)/(Brass ø 0.275 x 1.25 Inch)
1 pc
Porte-serviettes
2 pcs
Supports d'extrémité
4 pcs
Ancres pour cloisons sèches
4 pcs
Vis de montage
1 pc
Toallero
2 pcs
Soportes finales
4 pcs
Anclajes para paneles de yeso
4 pcs
Tornillos de montaje
Destornillador Phillips y ranurado, lápiz, cinta métrica, nivel.
(Laiton ø 7,0 x 32,0 mm)
(Latón ø 7.0 x 32.0 mm)
Instrucciones de Ensamblaje
/(Laiton ø 0,275 x 1,25 pouce)
/(Latón ø 0.275 x 1.25 pulgadas
Assembly Instructions
Instructions d'assemblage
2/3
)
UK – A – NS
Publicité
