Names And Functions Of Components - Panasonic Leica H-X2550 Manuel D'utilisation

Names and Functions of
Components
1 2 3
1
Lens surface
2
Aperture ring (clickless)
Adjusts the aperture value when you set the digital
camera to Aperture-Priority AE mode or Manual
Exposure mode.
You can set the aperture value on the digital
0
camera if you set the aperture ring to the [A]
position.
20
DVQX2166
(ENG)
4
3
Focus ring
Switches between AF (auto focus) and MF (manual
focus) by sliding the focus ring forwards or
backwards. (l 22)
Rotates the focus ring to focus when set to MF.
4
Zoom ring
Zooms to telephoto or wide-angle.
5
Lens fitting mark
6
Lens mount rubber
7
Contact points
Note
There may be differences in focus when you use zoom
0
after focusing. Focus again.
While shooting video, in some situations, AF operation
5 0
of the lens may be heard. In such situations changing
to MF will improve this situation.
6
The aperture can be adjusted with the aperture ring
0
only when a Panasonic digital camera is attached to
the lens. (As of July 2021)
7