Filling The Pool; Get Started - Sable SA-HF025 Mode D'emploi

CAUTION
· Assembly and disassembly of the pool and its accessories can only
be conducted by adult. No tools are needed during the installation.
· Use the pool on an even and stable surface only. Keep it at least 2
meters / 6.56 feet away from buildings or any other obstructions.
· Leave enough space around the pool for adults to walk through for
supervision of children inside the pool.
· Empty the pool after use or before storage.
· Never lean over or squeeze the inflating or deflating valve to avoid
injury or water overflow.
· Take off all sharp objects (e.g. jewelry, watch, key) before entering
the pool.
· Keep water inside the pool clean to avoid possible illness.
· Please clean and maintain the product properly to avoid fast wear
abrasion and aging.
· Check the pool regularly for any sharp edges to avoid injury to
human body.

Get started

1. Find an even and stable surface, remove any sharp objects. Place
the product onto the selected spot.
2. Unfold the product gently and check its intactness. Do not use it if
any breakage is found.
3. Fasten all the deflating or drainage valves securely.
Note:
· Do not install the pool over concrete, asphalt or any other hard
surface.
· Change water in the pool frequently (particularly in hot weather)
or when noticeably contaminated.
· Keep the assembly and installation instructions for further
reference.
Don't drag the deflated pool on the ground.
Inflating the Pool
Inflate the pool from the bottom ring to the top ring, never overinflate it.
1

Filling the Pool

Fill the pool slowly, do not exceed the middle ring to avoid water overflow.
MAX
2 3
MAX
MAX
05 / 06