Korg Kaoss Pad KP3+ Manuel D'utilisation page 23

Controllers available in External Control mode
You can use the following controllers in External Control mode.
Controller
Touch pad X-axis (entire range)
Touch pad Y-axis (entire range)
Touch pad X-axis (right of center)
Touch pad X-axis (left of center)
Touch pad Y-axis (middle to top)
Touch pad Y-axis (middle to bottom)
Touch pad XY-axes (lower left to upper right)
Touch pad on/off
LEVEL slider
FX DEPTH knob
HOLD button
PROGRAM MEMORY 1 button
PROGRAM MEMORY 2 button
PROGRAM MEMORY 3 button
PROGRAM MEMORY 4 button
PROGRAM MEMORY 5 button
PROGRAM MEMORY 6 button
PROGRAM MEMORY 7 button
PROGRAM MEMORY 8 button
SAMPLE BANK A button
SAMPLE BANK B button
SAMPLE BANK C button
SAMPLE BANK D button
PROGRAM/BPM knob
Messages that can be transmitted/received outside of External Control mode
With the factory settings, the following MIDI messages can be transmitted and received.
Controller
Touch pad X-axis
Touch pad Y-axis
Touch pad on/off
LEVEL slider
FX DEPTH knob
HOLD button
SAMPLE BANK A button
SAMPLE BANK B button
SAMPLE BANK C button
SAMPLE BANK D button
PROGRAM/BPM knob
Transmitted MIDI message (factory settings)
Control change (#70)
Control change (#71)
Control change (#72)
Control change (#73)
Control change (#74)
Control change (#75)
Control change (#76)
Control change (#92)
Control change (#93)
Control change (#94)
Control change (#95)
Control change (#49)
Control change (#50)
Control change (#51)
Control change (#52)
Control change (#53)
Control change (#54)
Control change (#55)
Control change (#56)
Note on/off (#36)
Note on/off (#37)
Note on/off (#38)
Note on/off (#39)
Program change (#0–#127), Timing clock
MIDI messages transmitted and received (factory settings)
Control change (#12)
Control change (#13)
Control change (#92)
Control change (#93)
Control change (#94)
Control change (#95)
Note on/off (#36)
Note on/off (#37)
Note on/off (#38)
Note on/off (#39)
Program change, bank select, MIDI timing clock (only if
the clock setting is Int)
23