Linking Melody Intell Type Selection To The Styles (Style Melody Intell Link) - Roland G-70 Mode D'emploi

If a second sound is available (this depends on the
selected TYPE), the display looks as follows:
(9) If the desired option is not displayed, use the
[PAGE¥1]~[PAGE¥3] fields to select another page.
Note: For "Traditional", "Latin", "CntryBallad", "OctaveType1"
and "OctaveType2", only the UP1 part is used. All other Melody
Intelligence types use both the UP1 and the MELODY INTELL
part, however.
As shown in the table above, selecting a different
TYPE also means that the sound assigned to the UP1
part changes. Most TYPEs add a second sound to it
(called "2ND TONE").
(10) Press the blue [2ND¥TONE] field and use the G-70's
standard procedure to select a different sound for
the additional harmony notes.
Note: This function is not available for TYPEs that provide no
("—") MELODY INTELL sound.
[MELODY¥INTELL]
Note: While the
panel is off, the 2ND TONE name appears on a gray back-
ground (if available). In this state, you cannot select a different
[MELODY¥INTELL]
sound. Switch on the
function of the same name) if you need to select another
sound for 2ND TONE.
Note: All MELODY INTELL settings can be written to a User
Program and recalled at a later stage.
(1) Press the [MENU] button.
(2) Press the [UTILITY], then the [GLOBAL] field.
button on the front
button (and the
(3) Press the [STYLE¥MELODY¥INTELL¥LINK] field to
(4) Press the [EXIT] button to return to the main page.
G-70 Music Workstation
Linking MELODY INTELL type selection to the
Styles (Style Melody Intell Link)
By default, the G-70 automatically loads the MELODY
INTELL type that is suited for the Styles you select. If
you don't need this automatic selection, here is how to
switch it off:
MENU
The display changes to:
switch it off. If it is on, the G-70 assigns a suitable
MELODY INTELLIGENCE type to each Style you
select.
r
OS Version 2
13