Type Of Control; Operating Modes - Gewiss CHORUS GW 16 972CB Manuel De Programmation

The thermostat can be set with 2 different control types:
• HVAC mode: the device manages 4 operating modes (OFF, ECONOMY, PRECOMFORT and
COMFORT) with associated setpoints, plus Automatic mode for autonomously managing the
temperature adjustment system on the basis of the programmed time profile. During operation, it is
possible to change the active mode based on your own needs without having to set a certain setpoint
value; it is also possible to temporarily force the setpoint of the active mode and change the setpoint
values associated with each mode.
• Setpoint: the device manages a single operating setpoint that is set by the user. During operation,
you can modify the setpoint, switch off the thermostat by activating OFF mode (building protection),
or activate Automatic mode to autonomously manage the temperature adjustment system on the basis
of the programmed time profile.
The thermostat has 5 different operating modes:
• AUTOMATIC
• ECONOMY
• PRE-COMFORT
• COMFORT
• OFF - ANTIFREEZE/HIGH TEMPERATURE PROTECTION
The button key is used to switch from one HVAC mode (auto, economy, precomfort, comfort,
off) to another: each time the key is pressed, the selected mode and the relevant setpoint are
displayed with a blinking light.
GENERAL DESCRIPTION

Type of control

Operating modes

In automatic mode, the thermostat uses a program that can be
differentiated for each day of the week. The display shows the word
AUTO, the measured room temperature, and the HVAC mode
configured in the time profile that is active at that moment (if the
control type is "HVAC mode").
The time profile must be programmed via the relative app for mobile
devices, using the Android or iOS operating system (available on
the relative stores).
In the economy, pre-comfort and comfort operating modes,
the thermostat always uses the corresponding temperature set-
points.
The display shows the detected room temperature and the
or symbol.
3
,