User Interface; Power Button; Selection Menu - ThermoProbe TP7-D Mode D'emploi

USER INTERFACE

Up/Down Menu Buttons
Indicators for
calibration points

Power Button

:
Pressing the Power button once will turn on the device. (Note: The instrument will automatically power off 20 minutes
after the last button push.) Pressing and holding the "Power" button until it displays 'OFF' will turn off the instrument.

Selection MENU

:
Use the "Up/Down" Menu buttons for the following selections:
LOG: Saves current stable temperature up to 4 readings
C-F: Select Celsius or Fahrenheit temperature display
DECIMAL: Select 0.1 or 0.01 display resolution
MEMORY - Use "up/down" buttons to display:
Lowest reading
Average reading
Highest reading
Saved (Logged) readings 1-10
(Use CLR LOG to erase saved readings)
CALIBRAT: Enter calibration/adjustment mode
(Requires 3 digit password: 112) - See Calibration Procedure
Power/Select Button
Up/Down Menu Buttons
Icons for Memory
readings
Temperature
indicating arrows
Low battery indicator
10/2017, JK