dji SNAIL 2305 Guide De L'utilisateur page 7

3 × M2
4 × M3
Thread Depth
Thread Depth
3 mm
3 mm
10.3 mm
19 mm
Assembly hole on the bottom Assembly hole on the top
Use a suitable propeller adapter and
airframe that can withstand the large thrust
delivered by the Snail Racing Propulsion
System.
Choose an appropriate screw length and
screw size according to the depth of the
assembly hole and thickness of the motor
mounting plate. Using screws that are too
long or too large may not be able to secure
the motor.
5