HAMPTON BAY SLOAN Guide D'utilisation Et D'entretien page 5

Assembly (continued)
3
Installing the light bulb
□
Install a 40-Watt maximum standard Type A bulb (sold
separately) into the socket on arm assembly (B).
□
Holding the lamp securely, loosen the adjustment knob on
the side of assembly (B) and adjust arm to desired angle
and retighten knob until secure. For shade angle adjustment
hold the lamp securely and adjust shade to desired angle.
NOTE: You can also use a CFL-equivalent energy-saving
bulb (sold separately).
5
Please contact 1-877-527-0313 for further assistance.
HAMPTONBAY.COM