Atlantis WebRunner USB Guide page 10

ENG
1.6 Verifying Your Modem
 From your Windows desktop, right-c lick on My Computer icon and c lick Properties.
 Click on the Hardware tab and then c lick Device Manager.
 Double-c lick on the Modem device. You should see the Conexant CX93010 ACF Modem being listed. This
means that your modem driver is successfully installed. If you see a yellow exclamation mark besides
Conexant CX93010 ACF Modem, it means that your driver is not installed successfully. Right-c lick on the
device and then uninstall the modem. Restart the system and then install your modem driver again.
V.92 Features Setting
The V.92 Feature Setting applic ation provides control over various V.92 features. When launched you will see the
V.92 Feature tab.
This tab provides the ability to enable/disable Quick Connect as well as to clear the Quick Connect memory. When you
click on the Clear Data button the next V.92 connection will be forced a non Quick Connect connection. All V.92
connection attempts after that will be Quick Connect connections.
This tab also provides the ability to enable/disable V.44 Compression.
For commonly asked questions, please refer to the Frequently Asked Questions in the Installation CD under the
\Manuals folder.
For instructions on Modem Settings please refer to the Modem Settings and V.92 Features Settings in the
Installation CD under the \Manuals folder.
1.7 Support
For technical questions
land.com/ita/supporto.php. For generic informations, please send an e-mail to info@atlantis-land.com. For presales
informations, please send an e-mail to prevendite@atlantis-land.com.
Atlantis SPA
Via S. Antonio, 8/10
20020 Lainate (MI)
ITALY
Fax: +39.02.78.62.64.39
Website: http://www.atlantis-land.com
Email: info@atlantis-land.com
If you need to install the driver manually, refer each Windows OS to the following
CD-Rom directory path: D:\A01-PU3\Driver\<Windows OS>.
In order for the Quick Connect and V.44 features to work, your ISP must support
the V.92 protocol. In order for the Modem on Hold features to work, your ISP must
support the V.92 protocol and your phone line must be provisioned with "call
waiting". If your phone line is also provisioned with "caller ID on call waiting", then
the modem can identify the caller ID information of the incoming call while
connected to the V.92 ISP.
and support, please contact our help -desk by
10
ENG
ticket on http://www.atlantis-