Samsung 6 Serie Guide De L'utilisateur page 6

Getting Started
UN32C6500 / UN40C6500 / UN46C6500 / UN55C6500
See separate guide for installing the stand.
Stand (1EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using four screws (M4 X L8) as shown.
2. With your TV upright, connect the TV to the Stand as
shown.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.
6
English
Guide Stand (1EA)
Screws (M4 X L8)
Guide Stand
Stand
Rear
Top view
Screws (M4 X L8)
3. Fasten two screws (M4 X L8) at position 1, and then
fasten three screws (M4 X L8) at position 2.
(M4 X L8)
Screws (9EA)
2
1