Storage, Shipping And Packing; Standards - europool NeoPAC Serie Manuel D'instructions

NeoPAC
Before any electrical connection is made, it is necessary to be sure that the power
supply cable conforms to the manufacturers stated requirements.
Before proceeding with any maintenance, service or reparation work, the product must
be isolated from the main electric supply terminal. Only qualified personnel should
carry out these tasks.
NeoPAC is released from any responsibility concerning damage caused by non-
compliance to the provided instructions, errors of handing, installation or usage.
You shouldn't install the heat pump in corrosive background, close to the sea, exposed
to salt fog, near a chlorine storage room or other corrosive chemicals.
This handbook can be modified without notice.

Storage, shipping and packing

Appliance must be packed and stored vertically, as specified on the packing.
A horizontal storage, even if temporary, will damage the appliance.
All damage due to incorrect packing or storage,will not be taken under warranty.
NeoPAC rencourages its customers to keep the heat pump packaging (paperboard
pack + polystyrene + pallet) for the duration of the warranty period in case of a need to
return the appliance to the factory.

Standards

CE standard conformity
NeoPAC pool heat pumps meet the following standards:
• Electromagnetic compatibility:
• Safety requirements for low voltage equipment:
• Pressure Equipment:
• Noise production:
• Harmonized standards:
Electrical connections
French standard installation reference:
Correct packing and storage position.
- 33 -
2004/108/EC
2006/95/EC
97/23/CE
200/14/CE
NF EN 60335.1,2.40
NF C 15 100.