golmar Jazz GB2 Guide Rapide page 3

JAZZ GB2 VIDEO DOOR ENTRY SYSTEM KIT - HOUSE
( ) INSTALLATION OF THE LOCK RELEASE
*
Installing the lock release:
If the lock release is to be fitted to a metal door, use a Ø3.5mm drill bit and
thread the hole made. For wooden doors, use a Ø3mm drill bit.
IMPORTANT: The lock release must be Golmar 12V AC or DC.
the AC lock release (TF-104 power supply required), fit the varistor
supplied with the kit directly to the lock release terminals to ensure the
device functions correctly.
( ) INSTALLATION DIAGRAM
*
( )
*
Connection to an apartment with 1 monitor VESTA2 or VESTA7 and Golmar DC lock releases.
APARTMENT 1
VESTA2
CODE 0
( ) 2
( ) 2 End of line: Placed Dip 6 to On.
Distanc s e and cross-sections :
VESTA2 VESTA7
or
B
Cable A B
Twisted pair 2x0.75mm 2 6 m 0 50m
( ) 3 65m 60m 15m
Twisted pair 2x1mm 2
FA- GB /A 2
( ) 3 Distances with Golmar RAP-2150 cable
(twisted pair 2x1mm ). 2
A
C
( )
( )
* 1 For more information, AC lock release or 2nd door release, see the TJAZZ VESTA2-VESTA7 user manual.
https://doc.golmar.es/search/manual/50122156
3,5 x 25
DIN-7972
( )
* With
M 4 x 8
DIN-963
VESTA7
or
BUS
Mains
100~240Vac
N L L
CN
FA- GB /A 2
BUS (M) BUS(PL)
Access panel
C
10m
SW1
ON
1 2 3
AP+ AP- C1 NA1 CV- CV+ BUSBUS
( ) 1
AP
Lock release
max. 12 Vdc/270mA.
4
Jazz GB2 Video Door Entry System Kit
2-Wire Non-Polarised
QUICK GUIDE
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
Golmar se réserve le droit de toute modification sans préavis .
Golmar reserves the right to make any modifications without prior notice.
Web code
golmar@golmar.es
50122156
T JAZZ VESTA2-VESTA7
www.golmar.es
Sistemas de comunicación S.A.
GR REV.0 1 4 7
EN